SATISFACTION IS GUARANTEED!

SATISFACTION IS GUARANTEED!

Free Call

(754) 218-2365

How Much Does a Flagstone Walkway Cost?

Adding a Flagstone Walkway gives your home a path around the house—and also keeps you from tripping on rocks or uneven patches of your lawn.

Cost Of Flagstone

  • Flagstone costs anywhere from $300 to $650 per ton.
  • Quartzite flagstone costs $500 to $550 per ton.
  • A ton of flagstone typically covers up to 140 square feet.
  • For the stone itself, you’ll pay $6 to $12 per square foot.
Flagstone Walkway

Flagstone is naturally beautiful, with colors ranging from sand or gray to red or purple. Especially when rough cut, it has a rustic charm and is extremely durable. It’s more affordable than many other types of stone, ranging from $6 to $12 per square foot for the stone itself. Though, there are some types of flagstone that cost between $20 and $25 per square foot. You’ll also need to account for labor at $23 to $26 per square foot.

There are many types of stone walkways, ranging from a sidewalk-like pathway made out of rectangular smooth-edged stones to a much more natural-looking pathway made out of rough-edged stones laid out like jigsaw puzzle pieces, to large stepping stones with small gaps in between. Flagstone is a generic term for any large, flat, quarried piece of natural stone used in outdoor landscaping or indoor flooring.

FAQs For Flagstone Walkway

It’s best to start with several inches of compacted gravel, followed by a layer of stone dust, also called decomposed granite, or DG.

You can place flagstones directly on a soil base or use stone dust or a bed of sand. 

Although concrete may be the first material that comes to mind, stone pavers are actually a far superior choice when considering durability, beauty and curb appeal for your driveway, walkway, or patio.

A flagstone walkway is a simple and functional way to beautify your outdoor space and provide an useable path to your garage, garden, shed or other points of interest in your lawn and garden.

The compressive strength of concrete generally ranges from 3,000 to 6,000 pounds per square inch (psi), while a 2021 laboratory test of Flagstone pavers demonstrated the average compressive strength of Flagstone to be around 10,600 psi.

Table of Contents

Cost to Install Flagstone Walkways


To Install Flagstone Walkways, you should expect to pay in the range of $3,857 To $4,394. What we use for Flagstone Walkway Installation estimates are average material costs, average hourly labor wages and labor productivity rates.

BasicBetterBest
Flagstone Walkway – Material Prices$315.00 – $327.00$330.00 – $332.00$335.00 – $337.00
Flagstone Walkway – Installation Cost$262.00 – $267.00$275.00 – $282.00$285.00 – $295.00
Flagstone Walkway – Total$477.00 – $495.00$505.00 – $515.00$520.00 – $532.50
Flagstone Walkway – Total Average Cost per square foot$14.00$16.00$18.00

Per Square foot for Flagstone Walkway Installation

Flagstone Walkway

The average cost to Install Flagstone Walkways is $24.00 to $26.00 per square foot. Always make sure to make all hiring decisions carefully and to make sure the contractor is fully insured, bonded and licensed. It is a good idea to check references and verify prior work quality.
If you want to receive the best value on Flagstone Walkway Installation projects, always make sure to receive project estimates from Pavers Experts contractors.

Why Choose A Flagstone Walkway

Flagstone walkways are an excellent alternative to concrete. It’s easy to power wash, lays well, and has well-defined lines. Flagstone provides a smooth, non-slip pathway that works well by pools. And you can evenly install them to prevent tripping.

Additionally, flagstone comes in a variety of sizes and colors, giving you a wide range of options when it comes to style, design, and application. You can cut them evenly for a smooth, symmetrical surface. Or fashion the irregular stones for a more natural look.

Flagstone Walkway

Other Cost To Installation Flagstone Walkway

ITEMQUANTITYLOWHIGH
Flagstone Walkway Cost
Non-discounted retail cost for common, mid-grade flagstone walkway. Quantity includes typical installation waste, fabrication overage, material for future repairs and delivery within 25 miles
215 square feet$807.32$944.15
Flagstone Walkway Labor
Direct labor expenses to install flagstone walkway.
42.8 hours$1,015.83$3,387.67
Flagstone Walkway Job Materials and Supplies
Cost of supplies that may be required to install flagstone walkway including: cutting and grinding materials, mortar and reinforcement.
200 square feet$89.56$96.16
Flagstone Walkway Equipment Allowance
Job related costs of specialty equipment used for job quality and efficiency, including: 115 v wet masonry saw, 5 cubic foot mortar box and small plate compactor.
 $64.56$86.39
Total Cost to Install Flagstone Walkways
215 square feet$3,857.28$4,394.37
 Average cost per square foot$24.29$26.98

Lay Flagstone Walkway on Dirt

A rustic look can be achieved with flagstone, which is suitable for laying in the dirt since it is heavy. You can lay flagstone on dirt with a few easy steps.

Flagstone Walkway
  • First, measure the area you want to place your pieces of flagstone.
  • Shovel down three to six inches in the measured area. And then flatten and smooth the area with a rake.
  • Lay the flagstone in the area and make sure it’s flat. After that, pack dirt around the stone, so it doesn’t wobble.
  • Next, you’ll lay the other pieces of flagstone with the same process and keep them spaced only a few inches apart.
  • The flagstone can be cleaned by sweeping and rinsing off the excess dirt once it has been placed and set.
  • Give the walkway a few hours to dry before walking on it.

Give the walkway a few hours to dry before walking on it

Repair a Mortared Flagstone Walkway

Skill: Easy, No masonry skill required
Cost: About $20 to $30
Estimated Time: 10 to 20 minutes per flagstone

Flagstone Walkway

Steps

  • Lift a loose flagstone from the walkway.
  • Scrub the surface below the flagstone with a wire brush to remove all dirt and mortar.
  • Wipe the surface clean with a dry sponge.
  • Use an air compressor fitted with an air nozzle to blast away any remaining dirt or dust from all cracks and crevices.
  • Apply a continuous bead of masonry adhesive back and forth across the entire surface. Space the beads no more than 1 inch apart.
  • Smooth and flatten the adhesive beads with a flat joiner.
    Apply a bead of mortar-joint repair adhesive around the perimeter of the flagstone.
  • Set the flagstone back into the walkway, pressing it down into the adhesive.
  • Clean the surface of the flagstone with a damp rag or sponge.
  • Fill in any voids or holes around the perimeter of the flagstone with mortar-joint repair adhesive. Smooth the adhesive with the flat joiner.
  • To help conceal the repair, sprinkle a mixture of stone dust and sand over the wet mortar-joint repair adhesive.
  • The next day, sweep off the stone dust and sand.
    Wait four or five days before walking on the repaired flagstone.
  • Use the remaining mortar joint repair adhesive to fill in any cracks or holes in the walkway.

Consultation Flagstone Walkway

What are your Future Goals?

How much Cost of Your Project?

What are your Plans?

Discuss Project Information and Details.

How much longer our Flagstone Walkway Installation team complete your work?

Discuss our Flagstone Walkway Installation service team Experience.

Contact Us

If you have any questions or comments, please fill out the following form and one of our representatives will contact you as soon as possible.

Customers Reviews

5/5

Free Consultation Today

Ready to give your patios, driveways, and pathways an overhaul without breaking your budget? If yes, give Pavers Experts Company a ring today. We will show you how we can revive your boring patios, pathways, decks, and other outdoor fixtures with pavers that not only reflect your style but achieve the positive image you want people to see when they see or visit your space

To get started, call us through our hotline today, and one of our paving contractors will be ready to answer your questions and get you started with your project. Call Pavers Experts Company at +1 (305) 927-9493 for your Free Consultation with a Pavers Expert!

Stay In Touch

Be the first to know about new arrivals and promotions