How Much does it Cost to do a Paver Walkway?
Pavers walkways are such a great investment for your home. Unlike ugly asphalt walkways that crack and crumble more and more over time or concrete walkways that crack after just a few short years, paver walkways can and will last for as long as you want.
The best part about paver walkways is that well they are a much more premium look and price than the two other options mentioned, they are much more economically priced than you might think, and the customization of them is endless.
It is normal for a small walkway to cost between $3,100 and $4,100, a mid-sized walkway to cost between $5,100 and $7,100, and a long walkway to cost approximately $8,100 and $12,100 on average. Of course, when you add in other variables such as grade, type of paver, and steps, the cost will fluctuate with a nice flat walkway being on the lower end and a walkway needing 4 steps will be towards the higher end of the spectrum.
If you have any other questions or would be interested in a pricing promise from us, fill out the contact form or give us a call, and we will be able to help you in minutes!
We Accept
Upgrade your home's curb appeal with our walkway paver installation service.
FAQs For Paver Walkway Cost
The average cost to build a brick walkway is $9 to $20 per square foot. This breaks down to a materials cost of $5 to $10 per square foot and a professional installation cost of $5 to $14 per square foot.
Call Now:Â +1 (754) 218-2365
Homeowners pay between $7 and $14 per square foot for installation of a new concrete walkway. Prices can go beyond this if significant grading is required or a complex decorative finish is requested. Get estimates for your concrete walkway from contractors near you.
Call Now:Â +1 (754) 218-2365
According to Home Stratosphere, the average cost of a paver path is between $1,800 and $4,700, including both materials and labor costs. In general, you can expect to pay about $7 per square foot for basic pavers or $19 per square foot for high-end materials.
Call Now:Â +1 (754) 218-2365
For any two people to walk together, 5.0 feet of space is the bare minimum. In some areas, some parks, such as near schools, sporting complexes, and many shopping districts, the minimum width for a pavement is 8.0 feet.
Call Now:Â +1 (754) 218-2365
A stone walkway costs the same as a patio, or $16 to $32 per square foot on average to install. Though you might spend as little as $60 and up to $50 per square foot.
Call Now:Â +1 (754) 218-2365
Walkway Cost Calculation
Cost Items to Consider
For your budget, you may need to consider restrictions or extras. A permit, for example, can set you back anywhere between $250 and $1100 depending on your local laws and where you are located.
You may also need permission from your homeowner’s association before you can build on the property.
You should take between three and five bids if you are contracting the workout. These bids should cover any requirements like permits, as well as labor and materials. Most contractors will overbid some materials in case of damage or errors during the installation. It is a wise choice to ask them if they will lower the final bid to cover only the materials they used, or if they will leave the excess material with you.
Costs
The overall cost of your project will be determined by a few factors. The largest of which will be the materials you choose to make your path from and the amount of material needed for your garden path.
It can be straight and take you from point A to point B, or it can wind through your property and go from one place to another. The more curves, though, the more expensive the path will be to install.
You will also need to decide if the garden path will be a contracted job hired out to a professional, or a DIY project that you will tackle yourself. On average, the cost range to install a garden walkway is between $1,800 and $4,700.
Paver Materials Cost
Pavers come in a wide variety of sizes, shapes, and colors. However, it is a time-consuming and tedious process to have them installed. You can consider pavers as a DIY option to save money on labor, but you will soon learn that it isn’t as easy as it may first seem.
If you are installing any curves in your path, the pavers will need to be cut to fit the curve. Unless you have a stone cutter, you will find it very difficult to install a paver pathway by yourself.
The average cost for a paver walkway is $12 per square foot.
Why Choose a Paver Walkway?
If you’re already working upgrading your yard, having a walkway fitted makes a lot of sense and could save you time and money. Paver walkways are attractive, versatile and relatively easy to maintain.
You can increase the value of your home by improving your yard and garden, as well as increase your enjoyment while living there. It’s worth taking that into consideration when you’re taking on projects like this one. You can make your yard more appealing to future buyers if you design it in a way that you will be happy with for years to come.
Let Us Help Our Walkway Paver Installation Contractors
Service Locations
SERVICE AREA
Serving Our Community
TESTIMONIALS
What Our Customers Say
Free Consultation Today
Ready to give your patios, driveways, and pathways an overhaul without breaking your budget? If yes, give Pavers Experts Company a ring today. We will show you how we can revive your boring patios, pathways, decks, and other outdoor fixtures with pavers that not only reflect your style but achieve the positive image you want people to see when they see or visit your space.
To get started, call us through our hotline today, and one of our paving contractors will be ready to answer your questions and get you started with your project. Call Pavers Experts Company at +1 (754) 218-2365 for your Free Consultation with a Pavers Expert!